instructions

• • P.E.P. the natural nail. (For details see our SHELLAC® Brand Application & Removal Step-by-Steps.)
  • Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
  • Apply a thin layer of SHELLAC® Viridian Veil. Cure for one minute.
  • Apply a thin layer of Viridian Veil in a marquise shape in the center of the nail. DO NOT CURE.
  • Apply teal multi-size glitter into the uncured Viridian Veil. Cure for one minute.
  • Apply a thin layer of SHELLAC® Clearly Pink. Cure for one minute.
  • Use a striping brush with SHELLAC® Lilac Eclipse to outline the marquise shape.
  • Apply a thin layer of SHELLAC® Berry Boudoir to both outside edges of the nail. Cure for one minute.
  • Use a detail brush with SHELLAC® Black Pool to outline both sides of the Lilac Eclipse. DO NOT CURE.
  • Use a detail brush with SHELLAC® Studio White to highlight the inside edge of the Lilac Eclipse. Cure for one minute.
  • Apply a thin layer of SHELLAC® Top Coat. Cure for one minute.
  • Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our “ CND® SHELLAC® ” Step-by-Steps.)
• 2 Apply a thin layer of CND® SHELLAC® Base Coat and cure for 10 seconds in the CND® UV Lamp.
• 3 Apply two thin layers of CND® SHELLAC® Desert Poppy to entire nail. Cure each layer for two minutes.
• 4 Dip the tip of a fan brush into CND® SHELLAC® Sun Bleached and feather over one side of the nail. Repeat with CND® SHELLAC® Mint Convertible on the other side of the nail. Cure for two minutes.
• 5 Repeat using the fan brush and lightly apply CND® SHELLAC® Desert Poppy over the Sun Bleached concentrating on the outer edge of the nail and CND® SHELLAC® Sage Scarf over the Mint Convertible. Cure for two minutes.
• 6 Dip the tip of a dry fan brush into Additives Copper Mine and feather over the yellow side of the nail. Repeat with Additives Emerald Mirage over the green side.
• 7 Apply a thin layer of CND® SHELLAC® Top Coat and cure for two minutes.
• 8 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• • P.E.P. the natural nail. (For details see our SHELLAC® Brand Application & Removal Step-by-Steps.)
  • Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
  • Apply a thin layer of SHELLAC® Ripe Guava. Cure for one minute.
  • Press multi-color transfer foil over nail to create a random pattern.
  • Apply a second thin layer of Ripe Guava and cure for one minute. Do not remove top film.
  • Apply VINYLUX® Shells In The Sand to floral pattern in stamping plate.
  • Use stamping scraper to remove excess color, roll stamper over pattern. DO NOT APPLY TO NAIL.
  • Use a detail brush with VINYLUX® Cream Puff to paint over floral pattern on stamper, making a fine perimeter around the pattern. Allow to dry completely.
  • Press desired portion of the pattern on stamper over the nail. Repeat creating desired floral pattern on the nail.
  • Apply VINYLUX® Sugarcane into the leaf pattern in stamping plate.
  • Use stamping scraper to remove excess color, roll stamper over pattern. DO NOT APPLY TO NAIL.
  • Use a detail brush with Cream Puff to paint over leaf pattern on stamper, making a fine perimeter around the pattern. Allow to dry completely.
  • Press desired portion of the pattern on stamper over the nail. Repeat creating desired leaf pattern on the nail.
  • Use a detail brush to highlight pattern with VINYLUX® Palm Deco and Cream Puff. Allow to dry completely.
  • Apply a thin layer of SHELLAC® Top Coat. Cure for one minute.
  • Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• • P.E.P. the natural nail. (For details see our VINYLUX® Long Wear Polish System Step-by-Steps.)
  • Apply a thin layer of VINYLUX® Ripe Guava. Allow to dry completely.
  • Apply a thin layer of transfer foil adhesive. Allow to dry until adhesive becomes transparent.
  • Press multi-color transfer foil over nail to create a random pattern.
  • Apply a second thin layer of Ripe Guava.
  • Apply transfers to wet polish with tweezers. Smooth the transfer to the nail with the Gel Flat Oval Brush. (See "To Create Transfer" below.)
  • Use a detail brush to highlight pattern with VINYLUX® Palm Deco and VINYLUX® Cream Puff.
  • Apply a thin layer of VINYLUX® Long Wear Top Coat.

To Create Transfer:

• • Apply VINYLUX® Shells In The Sand to floral pattern in stamping plate.
  • Use stamping scraper to remove excess color, roll stamper over pattern. DO NOT APPLY TO NAIL.
  • Use a detail brush with Cream Puff to paint over floral pattern on stamper, making a fine perimeter around the pattern.
  • Seal the design on stamper with Super Shiney™ Top Coat creating a transfer. Allow to dry completely.
  • When dry, peel transfer from stamper and cut out desired pattern pieces.
  • Repeat this technique with VINYLUX® Sugarcane using the leaf pattern stamping plate.

instructions

• 1 P.E.P. the natural nail. (For details see our SHELLAC® Brand Application & Removal Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply two thin layers of SHELLAC® Blue Eyeshadow. Cure each layer for one minute.
• 4 Apply a thin layer of SHELLAC® Original Top Coat and cure for one minute.
• 5 Wipe with 99% Isopropyl Alcohol to remove top film.
• 6 Repeat the cure for one additional minute and wipe with 99% Isopropyl Alcohol. Wait four minutes to allow residual solvents to evaporate.
• 7 Dip the cosmetic sponge into Chrome Effect powder and press onto two thirds of the nail, burnishing the pigment until flat and smooth.
• 8 Apply VINYLUX® Cream Puff to the pattern in stamping plate.
• 9 Use the stamping scraper to remove excess color, roll stamper over pattern and apply to the nail. Allow to dry completely.
• 10 Apply a thin layer of SHELLAC® Original Top Coat and cure for one minute.
• 11 Wipe with 99% Isopropyl Alcohol to remove top film.
• 12 Use a detail brush to apply triangles in various sizes with SHELLAC® Pink Leggings, SHELLAC® Banana Clips and Blue Eyeshadow. Let set for one minute.
• 13 Use spatula to sprinkle RETENTION+® Sculpting Powder Clear over the triangles. Allow the powder to absorb into the uncured colors and repeat until there is no longer any shine. Cure for one minute.
• 14 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our VINYLUX® Long Wear Polish System Step-by-Steps.)
• 2 Apply two thin layers of VINYLUX® Blue Eyeshadow. Allow to dry completely.
• 3 Dip the cosmetic sponge into Chrome Effect powder and press onto two thirds of the nail, burnishing the pigment until flat and smooth.
• 4 Apply VINYLUX® Cream Puff to the pattern in stamping plate.
• 5 Use the stamping scraper to remove excess color, roll stamper over pattern and apply to the nail.
• 6 Apply a thin layer of VINYLUX® Long Wear Top Coat.
• 7 In a mixing tray, blend a few drops of VINYLUX® Pink Leggings with RETENTION+® Sculpting Powder Clear to create a paste.
• 8 Use a detail brush to apply triangles in various sizes.
• 9 Repeat this technique with VINYLUX® Banana Clips and Blue Eyeshadow.

instructions

• • P.E.P. the natural nail. (For details see our SHELLAC® Brand Application & Removal Step-by-Steps.)
  • Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
  • Apply two thin layers of SHELLAC® Shells In the Sand. Cure each layer for one minute.
  • Dip the tip of the dry Gel Flat Oval Brush into red pigment and press into 2/3 of the nail starting at the extension edge, feathering towards the center. Repeat to darken the shade at the tip.
  • Apply a thin layer of SHELLAC® Top Coat. Cure for one minute.
  • Wipe with 99% Isopropyl Alcohol to remove top film.
  • Apply a diagonal swipe of SHELLAC® Palm Deco to the top left corner and bottom right corner. DO NOT CURE.
  • Carve out the palm leaf pattern using the Gel Flat Oval Brush lightly moistened with 99% Isopropyl Alcohol.
  • Use spatula to sprinkle RETENTION+® Clear Powder over palm leaf patterns. Allow powder to absorb into uncured colors and repeat until there is no longer any shine. Cure for one minute.
  • Wipe with 99% Isopropyl Alcohol to remove residue.

instructions

• • P.E.P. the natural nail. (For details see our VINYLUX® Long Wear Polish System Step-by-Steps.)
  • Apply two thin layers of VINYLUX® Shells In the Sand. Allow to dry completely.
  • Dip the tip of the dry Gel Flat Oval Brush into red pigment and press into 2/3 of the nail starting at the extension edge, pressing towards the center. Repeat to darken the shade at the tip.
  • Apply a thin layer of VINYLUX® Long Wear Top Coat. Allow to dry completely.
  • Apply a diagonal swipe of VINYLUX® Palm Deco to the top left corner. Use the Gel Flat Oval Brush lightly moistened with acetone to wipe away excess color creating the palm leaf pattern.
  • Use a spatula to sprinkle RETENTION+® Clear Powder over the wet color allowing powder to absorb and create a matte finish.
  • Repeat for the leaf in the bottom right corner.

instructions

• 1 P.E.P. the natural nail. (For details see our SHELLAC® Brand Application & Removal Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply a thin layer of SHELLAC® Clearly Pink. Cure for one minute.
• 4 Determine the design center point. Use a striping brush with SHELLAC® Video Violet to create a triangle of color starting at the focal point and continuing to the perimeter of the nail. Fill in the triangle and refine with the CND® ProSeries Gel Oval Brush lightly moistened with Isopropyl Alcohol if needed. Cure for 10 seconds.
• 5 Repeat with SHELLAC® Ecstasy, SHELLAC® Blue Eyeshadow and SHELLAC® Pink Leggings. Cure for one minute.
• 6 Cut Opalescent Mylar into triangular shapes and use tweezers to place over the cured colors in the design.
• 7 Cut Opalescent Tinsel to length and place between the colors to accent the design.
• 8 Apply a thin layer of SHELLAC® Top Coat and cure for one minute.
• 9 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our VINYLUX® Long Wear Polish System Step-by-Steps.)
• 2 Apply a thin layer of VINYLUX® Lavishly Loved.
• 3 Determine the design center point. Use a striping brush with VINYLUX® Video Violet to create a triangle of color starting at the focal point and continuing to the perimeter of the nail. Fill in the triangle and refine with the CND® ProSeries Gel Oval Brush lightly moistened with acetone if needed.
• 4 Repeat with VINYLUX® Ecstasy, VINYLUX® Blue Eyeshadow and VINYLUX® Pink Leggings.
• 5 Apply a thin layer of VINYLUX® Long Wear Top Coat.
• 6 Cut Opalescent Mylar into triangular shapes and use tweezers to place over the colors in the design.
• 7 Cut Opalescent Tinsel to length and place between the colors to accent the design.
• 8 Apply a thin layer of VINYLUX® Long Wear Top Coat.

instructions

• 1 P.E.P. the natural nail. (For details see our SHELLAC® Brand Application & Removal Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply two thin layers of SHELLAC® Blue Eyeshadow. Cure each layer for one minute.
• 4 Apply a thin layer of SHELLAC® Original Top Coat and cure for one minute.
• 5 Wipe with 99% Isopropyl Alcohol to remove top film.
• 6 Repeat the cure for one additional minute and wipe with 99% Isopropyl Alcohol. Wait four minutes to allow residual solvents to evaporate.
• 7 Dip the cosmetic sponge into Chrome Effect powder and press onto two thirds of the nail, burnishing the pigment until flat and smooth.
• 8 Apply a thin layer of SHELLAC® Original Top Coat and cure for one minute.
• 9 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our VINYLUX® Long Wear Polish System Step-by-Steps.)
• 2 Apply two thin layers of VINYLUX® Blue Eyeshadow. Allow to dry completely.
• 3 Dip the cosmetic sponge into Chrome Effect powder and press onto two thirds of the nail, burnishing the pigment until flat and smooth.
• 4 Apply a thin layer of VINYLUX® Long Wear Top Coat.

instructions

• 1 P.E.P. the natural nail. (For details see our SHELLAC® Brand Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply two thin layers of SHELLAC® Alluring Amethyst. Cure each layer for one minute.
• 4 Apply VINYLUX® Black Pool to the pattern in stamping plate.
• 5 Use the stamping scraper to remove excess color, roll stamper over pattern, and apply to the nail.
• 6 Apply a thin layer of SHELLAC® Dark Diamonds in a crescent shape around the tip of the nail. Cure for one minute.
• 7 Apply a thin layer of XPRESS5 ™ Top Coat. Cure for one minute.
• 8 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our SHELLAC® Brand Application & Removal Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply two thin layers of SHELLAC® Cream Puff. Cure each layer for one minute.
• 4 Apply a thin layer of SHELLAC® Top Coat. Cure for one minute.
• 5 Use a detail brush to create horizontal stripes of color over the nail with SHELLAC® Pink Leggings, SHELLAC® Ecstasy, SHELLAC® Jelly Bracelet, SHELLAC® Blue Eyeshadow and SHELLAC® Video Violet. Cure for one minute.
• 6 Use a detail brush to apply SHELLAC® Top Coat over the stripes of color creating a raised effect. Cure for one minute.
• 7 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our VINYLUX® Long Wear Polish System Step-by-Steps.)
• 2 Apply two thin layers of VINYLUX® Cream Puff.
• 3 Apply a thin layer of VINYLUX® Long Wear Top Coat.
• 4 Use a detail brush to create horizontal stripes of color over the nail with VINYLUX® Pink Leggings, VINYLUX® Ecstasy, VINYLUX® Jelly Bracelet, VINYLUX® Blue Eyeshadow and VINYLUX® Video Violet.
• 5 Use a detail brush to apply VINYLUX® Long Wear Top Coat over the stripes of color creating a raised effect.

instructions

• 1 P.E.P. the natural nail. (For details see our SHELLAC® Brand Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply two thin layers of SHELLAC® Pink Pursuit. Cure each layer for one minute.
• 4 Apply SHELLAC® Dark Diamonds to the pattern stamping plate.
• 5 Use the stamping scraper to remove excess color, roll stamper over pattern, and apply to the nail.
• 6 Use a medium-length striping brush and SHELLAC® Black Pool, apply a thin line down the center of the nail, followed by two small crescent shapes at the cuticle area. Cure for one minute.
• 7 Outline the entire perimeter of the nail using SHELLAC® Oxblood. Cure for one minute.
• 8 Apply a thin layer of XPRESS5 ™ Top Coat. DO NOT CURE.
• 9 Place Swarovski crystals into the wet top coat. Cure for one minute.
• 10 (Optional) Use striping brush and a little top coat around the larger stones for a more secure set. Cure for one minute.
• 11 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our SHELLAC® Brand Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply two thin layers of SHELLAC® Garnet Glamour. Cure each layer for one minute.
• 4 Apply a thin layer of XPRESS5 ™ Top Coat. Cure for one minute.
• 5 Wipe with 99% Isopropyl Alcohol to remove top film.
• 6 (Optional) Apply SHELLAC® Black Pool to the pattern in the stamping plate. Use the stamping scraper to remove excess color, roll stamper over pattern, and apply to the nail.
• 7 Use a detail brush to apply Black Pool over the pattern to create a raised effect. DO NOT CURE.
• 8 Use a spatula to sprinkle RETENTION+® Sculpting Powder Clear over the pattern. Allow the powder to absorb into the uncured Black Pool and repeat until there is no longer any shine. Cure for one minute.
• 9 Wipe with 99% Isopropyl Alcohol to remove residue.

instructions

• 1 P.E.P. the natural nail. (For details see our SHELLAC® Brand Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply a thin layer of SHELLAC® Black Pool. Cure for one minute.
• 4 Apply SHELLAC® Emerald Lights from the cuticle to the center of the nail, using the CND® ProSeries Gel Flat Oval Brush, blending down towards the extension edge, keeping the majority of the product in the cuticle area. DO NOT CURE.
• 5 Using a makeup sponge and tweezers, apply SHELLAC® Dark Diamonds to the center of the nail, blending the color at the tip. Cure for one minute.
• 6 Apply a thin layer of XPRESS5 ™ Top Coat. Cure for one minute.
• 7 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our SHELLAC® Brand 14+ Day Nail Color Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply two thin layers of SHELLAC® Oxblood. Cure each layer for one minute.
• 4 Apply the transfer pieces to the top film with tweezers in a random pattern. Smooth the transfer pieces to the nail with a CND® ProSeries Gel Flat Oval Brush lightly moistened with SCRUBFRESH® . (See "To Create Transfer" below.)
• 5 Apply a thin layer of XPRESS5 ™ Top Coat. Cure for one minute.
• 6 Wipe with 99% Isopropyl Alcohol to remove top film.

To Create Transfer:

• Brush a thin, even layer of VINYLUX® Brass Button onto palette paper and allow to dry completely.

• When dry, cut the transfer into pieces to create small "shards."

instructions

• 1 P.E.P. the natural nail. (For details see our VINYLUX® Long Wear Polish System Step-by-Steps.)
• 2 Apply two thin layers of VINYLUX® Oxblood.
• 3 Apply the transfer pieces to the wet polish with tweezers in a random pattern. Smooth the transfer pieces to the nail with a CND® ProSeries Gel Flat Oval Brush. (See "To Create Transfer" below.)
• 4 Apply a thin layer of VINYLUX® Long Wear Top Coat.

To Create Transfer:

• Brush a thin, even layer of VINYLUX® Brass Button to palette paper and allow to dry completely.

• When dry, cut the transfer into pieces to create small "shards."

instructions

• 1 P.E.P. the natural nail. (For details see our SHELLAC® Brand 14+ Day Nail Color Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply a thin layer of SHELLAC® Denim Patch. DO NOT CURE.
• 4 Apply CND® Additives Boho Beads into the Denim Patch in a linear pattern. Cure for one minute.
• 5 Apply two thin layers of Denim Patch over the beads, curing each layer for one minute.
• 6 Mix VINYLUX® Locket Love with a few drops of acetone in a mixing tray and feather over the nail using a fan brush.
• 7 Apply a thin layer of XPRESS5 ™ Top Coat. Cure for one minute.
• 8 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our VINYLUX® Long Wear Polish Step-by-Steps.)
• 2 Apply two thin layers of VINYLUX® Denim Patch.
• 3 Apply CND® Additives Boho Beads into the Denim Patch in a linear pattern, gently pressing into the wet polish.
• 4 Apply a thin layer of Denim Patch over the Boho Beads.
• 5 Mix VINYLUX® Locket Love with a few drops of acetone in a mixing tray and feather over the nail using a fan brush.
• 6 Apply a thin layer of VINYLUX® Long Wear Top Coat.

instructions

• 1 P.E.P. the natural nail. (For details see our SHELLAC® Brand 14+ Day Nail Color Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply two thin layers of SHELLAC® Oxblood. Cure each layer for one minute.
• 4 Apply a thin layer of XPRESS5 ™ Top Coat. Cure for one minute.
• 5 Mix CND® Additives Tainted Gold with XPRESS5 ™ Top Coat in a mixing tray to create a thick paste and sponge onto the nail in a random pattern. Sponge on additional layers to create added texture and dimension. Cure for one minute between each layer.
• 6 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our VINYLUX® Long Wear Polish System Step-by-Steps.)
• 2 Apply two thin layers of VINYLUX® Oxblood.
• 3 Apply a thin layer of VINYLUX® Long Wear Top Coat.
• 4 Mix CND® Additives Tainted Gold with Super Shiney™ Top Coat in a mixing tray to create a thick paste and sponge onto the nail in a random pattern. Sponge on additional layers to create added texture and dimension.

instructions

• 1 P.R.E.P. the natural nail and apply a CND® Tip. Apply a thin base layer of RETENTION+® Sculpting Powder Clear and finish with the 180 side of the Hot Shot™ File. (For details, see our "Liquid & Powder Enhancements Sculpted on a Tip" Step-by-Step.)
• 2 Mix CND® Additives and RETENTION+® Clear Powder in a mixing tray to create the design’s colors. To maintain the integrity of the enhancement never mix more than 30% Additives to any liquid and powder blend.
  Black Blend
  - 3 parts RETENTION+® Sculpting Powder Clear
  - 1/4 part Additives Black
• 3 Apply a thin layer of sheer black powder to the entire nail.
• 4 Sponge transfer foil adhesive to the nail in a random pattern and allow to dry.
• 5 Press black transfer foil over the nail.
• 6 Mix Additives Russet Rage, Tainted Gold and Dungarees in separate mixing trays with a few drops of 99% IPA to make a paste.
• 7 Sponge the Additives mixture over the nail starting with Tainted Gold, followed by Dungarees and Russet Rage. Repeat for additional texture.
• 8 Apply a layer of RETENTION+® Clear Powder to encase the design and finish with the 180 side of the Hot Shot™ File. (For details, see our "Liquid & Powder Enhancements Sculpted on a Tip" Step-by-Step.)
• 9 Optional: For added dimension, apply more black transfer foil.
• 10 Apply a thin layer of BRISA® Gloss. Cure for one minute.
• 11 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our SHELLAC® Brand 14+ Day Nail Color Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply a thin layer of SHELLAC® Denim Patch. DO NOT CURE.
• 4 Apply drops of Oxblood into the uncured Denim Patch. Cure for one minute.
• 5 Apply a thin layer of SHELLAC® Clearly Pink. DO NOT CURE.
• 6 Mix CND® Additives Russet Rage and Dungarees in two separate mixing trays and add a few drops of 99% IPA.
• 7 Use a stylus to drop the Additives mixes in random patterns in the uncured Clearly Pink. Cure for one minute.
• 8 Apply a thin layer of XPRESS5 ™ Top Coat. Cure for one minute.
• 9 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our SHELLAC® Brand 14+ Day Nail Color Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply two thin layers of SHELLAC® Denim Patch. Cure each layer for one minute.
• 4 Burnish gold pigment into entire nail using a CND® ProSeries Gel Flat Oval Brush.
• 5 Apply a thin layer of XPRESS5 ™ Top Coat. Cure for one minute.
• 6 Burnish CND® Additives Polished Peridot into the entire nail.
• 7 Use a stylus to apply drops of XPRESS5 ™ Top Coat in a random pattern on the nail. Cure for one minute.
• 8 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our SHELLAC® Brand 14+ Day Nail Color Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply two thin layers of SHELLAC® Cityscape. Cure each layer for one minute.
• 4 Apply one thin layer of SHELLAC® Denim Patch. DO NOT CURE.
• 5 Brush over the uncured Denim Patch using a CND® ProSeries Gel Flat Oval Brush lightly moistened with IPA to achieve an "acid wash" appearance.
• 6 Use a stylus to define the pattern. Cure for one minute.
• 7 Brush CND® Additives Dungarees over the nail using a dry Gel Flat Oval Brush.
• 8 Apply a thin layer of XPRESS5 ™ Top Coat. Cure for one minute.
• 9 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our VINYLUX® Long Wear Polish System Step-by-Steps.)
• 2 Apply two thin layers of VINYLUX® Cityscape and allow to dry completely.
• 3 Apply a thin layer of VINYLUX® Denim Patch.
• 4 Brush over random patches of the nail using a CND® ProSeries Gel Flat Oval Brush lightly moistened with acetone to achieve an "acid wash" appearance.
• 5 Use a stylus to define the pattern.
• 6 Mix CND® Additives Dungarees with a small amount of VINYLUX® Long Wear Top Coat in a mixing tray and sponge over the nail.
• 7 Apply a thin layer of VINYLUX® Long Wear Top Coat.

instructions

• 1 P.R.E.P. the natural nail and apply a CND® Clear Tip. Apply a BRISA® Sculpting Gel Clear enhancement and finish with the 180 side of the Blizzard™ File. (For details, see our " BRISA® Gel Enhancements Sculpted on a Tip" Step-by-Step.)
• 2 Apply a thin layer of BRISA® Paint White to the entire nail. Cure for one minute in the CND® LED Lamp.
• 3 Mix CND® Additives Dungarees with a few drops of 99% IPA in a mixing tray and sponge over the nail.
• 4 Sponge SHELLAC® Denim Patch and SHELLAC® Black Pool, layering the colors over each other. Cure for one minute.
• 5 Apply a thin layer of BRISA® Gloss. Cure for one minute.
• 6 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our SHELLAC® Brand 14+ Day Nail Color Application & Removal Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply two thin layers of SHELLAC® Alluring Amethyst. Cure each layer for one minute.
• 4 Apply a thin layer of SHELLAC® Garnet Glamour. Cure for one minute.
• 5 Apply a thin layer of SHELLAC® Black Pool. Do not cure and allow to set for 60 seconds.
• 6 Use angled art brush lightly moistened with 99% Isopropyl Alcohol to carve out a pattern revealing the Garnet Glamour. Cure for one minute.
• 7 Apply a thin layer of XPRESS5 ™ Top Coat. Cure for one minute.
• 8 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our VINYLUX® Long Wear Polish System Step-by-Steps.)
• 2 Apply two thin layers of VINYLUX® Black Pool.
• 3 Use a stylus with VINYLUX® Cream Puff to create medium- and small-size dots around the perimeter of the nail.
• 4 Layer VINYLUX® Rouge Red over the small white dots and add tiny VINYLUX® Silver Chrome dots on the inside perimeter.
• 5 Apply a small amount of Super Shiney™ Top Coat to the center of the nail.
• 6 Place stone embellishment into the wet Top Coat.
• 7 Apply a thin layer of VINYLUX® Long Wear Top Coat.

instructions

• 1 P.E.P. the natural nail. (For details see our VINYLUX® Long Wear Polish System Step-by-Steps.)
• 2 Apply two thin layers of VINYLUX® Black Pool.
• 3 Using a makeup sponge with VINYLUX® Cityscape, sponge the color in a random pattern. Repeat with VINYLUX® Denim Patch, Black Pool and VINYLUX® Hand Fired.
• 4 Apply a thin layer of VINYLUX® Long Wear Top Coat.

instructions

• 1 P.E.P. the natural nail. (For details see SHELLAC® Brand 14+ Day Nail Color Application & Removal Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the SHELLAC® LED Lamp.
• 3 Apply two thin layers of SHELLAC® Aqua-intance. Cure each layer for one minute.
• 4 Brush VINYLUX® Honey Darlin' to the pattern in the stamping plate, followed by a drop of VINYLUX® Cream Puff. Use the stamping scraper to blend the two colors together on the plate.
• 5 Remove excess blend, roll stamp over pattern and apply to the nail.
• 6 Using a dry CND® ProSeries Gel Flat Oval Brush apply CND® Additives Lavender Whispers to the second pattern in the stamping plate, followed by a drop of VINYLUX® Lavender Lace. Use the stamping scraper to blend the two colors together on the plate.
• 7 Remove excess blend, roll stamp over pattern and apply to the nail.
• 8 Using a detail brush, apply a thin layer of Honey Darlin' around the perimeter of the nail.
• 9 Apply XPRESS5 ™ Top Coat. Cure for one minute.
• 10 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see VINYLUX® Long Wear Polish System Step-by-Steps.)
• 2 Apply two thin layers of VINYLUX® Aqua-intance. Let dry completely.
• 3 Brush VINYLUX® Honey Darlin' to the pattern in the stamping plate, followed by a drop of VINYLUX® Cream Puff. Use the stamping scraper to blend the two colors together on the plate.
• 4 Remove excess blend, roll stamp over pattern and apply to the nail.
• 5 Using a dry CND® ProSeries Gel Flat Oval Brush apply CND® Additives Lavender Whispers to the second pattern in the stamping plate, followed by a drop of VINYLUX® Lavender Lace. Use the stamping scraper to blend the two colors together on the plate.
• 6 Remove excess blend, roll stamp over pattern and apply to the nail.
• 7 Using a detail brush, apply a thin layer of Honey Darlin' around the perimeter of the nail.
• 8 Apply a thin layer of VINYLUX® Long Wear Top Coat.

instructions

• 1 P.E.P. the natural nail. (For details see SHELLAC® Brand 14+ Day Nail Color Application & Removal Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply a thin layer of SHELLAC® Beau. Cure for one minute.
• 4 Apply SHELLAC® Honey Darlin' in a semicircle. Start just below the cuticle on the left side of the nail, sweeping down to the right. Let set for one minute. DO NOT CURE.
• 5 Using a CND® ProSeries Gel Flat Oval Brush moistened with IPA, carve out a line down the center of the semicircle revealing a half-heart and triangle shape. Cure for one minute.
• 6 Use a dry ProSeries Gel Flat Oval Brush to apply CND® Additives Cobalt Clash to top of the heart shape.
• 7 Apply Additives Twinkle Pink to the top of the triangle shape followed by Additives Exhibition to the bottom.
• 8 Use a detail brush with SHELLAC® Cream Puff to create a swirl pattern over the heart shape and a crisscross pattern over the triangle shape. DO NOT CURE.
• 9 Apply a thin layer of Cream Puff around each shape and the perimeter of the entire nail. Cure for one minute.
• 10 Apply XPRESS5 ™ Top Coat. Cure for one minute.
• 11 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see VINYLUX® Long Wear Polish System Step-by-Steps.)
• 2 Apply a thin layer of VINYLUX® Lavishly Loved.
• 3 Apply VINYLUX® Honey Darlin' to the left side of the nail creating a half-heart shape followed by a triangle shape to the right side of the nail. Repeat for additional coverage.
• 4 Use a dry CND® ProSeries Gel Flat Oval Brush to apply CND® Additives Cobalt Clash to top of the heart shape.
• 5 Apply Additives Twinkle Pink to the top of the triangle shape followed by Additives Exhibition to the bottom.
• 6 Use a detail brush with VINYLUX® Cream Puff to create a swirl pattern over the heart shape and a crisscross pattern over the triangle shape.
• 7 Apply a thin layer of Cream Puff around each shape and the perimeter of the entire nail.
• 8 Apply a thin layer of VINYLUX® Long Wear Top Coat.

instructions

• 1 P.E.P. the natural nail. (For details see SHELLAC® Brand 14+ Day Nail Color Application & Removal Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply two thin layers of SHELLAC® Be Demure. Cure each layer for one minute.
• 4 Pour a small amount of SHELLAC® Winter Glow and SHELLAC® Cream Puff into a mixing tray.
• 5 Use a makeup sponge to apply Winter Glow to the center of the nail. Repeat with Cream Puff to the tip of the nail. DO NOT CURE.
• 6 Use a CND® ProSeries Gel Flat Oval Brush lightly moistened with IPA to blend colors. Cure for one minute.
• 7 Use a dry CND® ProSeries Gel Flat Oval Brush to apply CND® Additives Exhibition to the tip of the nail.
• 8 Apply XPRESS5 ™ Top Coat. Cure for one minute.
• 9 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see VINYLUX® Long Wear Polish System Step-by-Steps.)
• 2 Apply two thin layers of VINYLUX® Be Demure. Allow to dry.
• 3 Pour a small amount of VINYLUX® Winter Glow and VINYLUX® Cream Puff into a mixing tray.
• 4 Use a makeup sponge to apply Winter Glow to the center of the nail. Repeat with Cream Puff to the tip of the nail.
• 5 Before polish dries use a CND® ProSeries Gel Flat Oval Brush lightly moistened with acetone to blend colors.
• 6 Mix a small amount of CND® Super Shiney™ Top Coat with CND® Additives Exhibition in a mixing tray and feather onto the tip of the nail with a ProSeries Gel Flat Oval Brush.
• 7 Apply a thin layer of VINYLUX® Long Wear Top Coat.

instructions

• 1 P.E.P. the natural nail. (For details see SHELLAC® Brand 14+ Day Nail Color Application & Removal Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply two thin layers of SHELLAC® Be Demure. Cure each layer for one minute.
• 4 Using a stylus, apply SHELLAC® Sparks Fly diagonally across the nail creating a webbed pattern. Cure for one minute.
• 5 Apply XPRESS5 ™ Top Coat. Cure for one minute.
• 6 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see VINYLUX® Long Wear Polish System Step-by-Steps.)
• 2 Apply two thin layers of VINYLUX® Be Demure.
• 3 Mix a small amount of VINYLUX® Desert Poppy with CND® Additives Exhibition in a mixing tray and use a stylus to apply the blend diagonally across the nail creating a webbed pattern.
• 4 Apply a thin layer of VINYLUX® Long Wear Top Coat.

instructions

• 1 P.E.P. the natural nail. (For details see SHELLAC® Brand 14+ Day Nail Color Application & Removal Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply a thin layer of SHELLAC® Be Demure. Cure for one minute.
• 4 Apply a thin layer of SHELLAC® Cream Puff to the entire nail. Let sit for one minute. DO NOT CURE.
• 5 Use a stylus to etch a crisscross pattern into the Cream Puff. Cure for one minute.
• 6 Use a dry CND® ProSeries Gel Flat Oval Brush to apply CND® Additives™ in Yellow, Twinkle Pink, Cerulean Blue and Green, alternating colors in diagonal rows.
• 7 Apply XPRESS5 ™ Top Coat. Cure for one minute.
• 8 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see SHELLAC® Brand 14+ Day Nail Color Application & Removal Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply a thin layer of SHELLAC® Beau. Cure for one minute.
• 4 Apply a thin layer of SHELLAC® Pink Pursuit to ¾ of the nail, leaving a moon shape in the cuticle area. Cure for one minute. Repeat for additional coverage.
• 5 Use a detail brush with SHELLAC® Cream Puff to create a semicircle-shaped pattern at the base of the moon and outline the perimeter of the moon. DO NOT CURE.
• 6 Use a stylus with Cream Puff to create small dots and complete the lace design. Cure for one minute.
• 7 Apply XPRESS5 ™ Top Coat. Cure for one minute.
• 8 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see VINYLUX® Long Wear Polish System Step-by-Steps.)
• 2 Apply one thin layer of VINYLUX® Lavishly Loved to the entire nail.
• 3 Apply two thin layers of VINYLUX® Pink Pursuit to ¾ of the nail, leaving a moon shape in the cuticle area.
• 4 Use a detail brush with VINYLUX® Cream Puff to create a semicircle-shaped pattern at the base of the moon and outline the perimeter of the moon.
• 5 Use a stylus with Cream Puff to create small dots and complete the lace design.
• 6 Apply a thin layer of VINYLUX® Long Wear Top Coat.

instructions

• 1 P.R.E.P. the natural nail and apply a CND® Tip. Apply a thin base layer of RETENTION+® Sculpting Powder Neutral Opaque and finish with the 180 side of the Hot Shot™ File. (For details, see our Liquid & Powder Enhancements Sculpted on a Tip Step-by-Step.)
• 2 Pick up a clear bead of RETENTION+® Liquid and Powder and dip into CND® Additives Exhibition, and blend together on a piece of palette paper. Apply the bead to Zone 1, pressing towards Zone 2 and 3 to blend out the color slightly.
• 3 Repeat this technique with Lavender Whispers in Zone 3, pressing towards Zone 2 to blend the colors together. Finish with the 180 side of the Hot Shot™ File if needed.
• 4 Mix a small amount of BRISA® Gloss with Additives Exhibition and apply to the nail. Cure for one minute in the CND® LED Lamp.
• 5 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.R.E.P. the natural nail and apply a CND® Clear Tip. Apply a BRISA® Sculpting Gel Clear enhancement and finish with the 180 side of the Blizzard™ File. (For details, see BRISA® Gel Enhancements Sculpted on a Tip Step-by-Step.)
• 2 Apply a few drops of BRISA® Paint White to paisley floral stamping plate. Remove excess blend, roll stamp over pattern and apply to the nail. Cure for one minute in the CND® LED Lamp.
• 3 Apply CND® Additives Lavender Whispers and Twinkle Pink to paisley floral stamping plate, followed by a drop of BRISA® Paint Soft White. Use the stamping scraper to blend the colors together on the plate. Remove excess blend, roll stamp over pattern and apply to the nail. Cure for one minute.
• 4 Apply Additives Cobalt Clash and Cerulean Blue to the fishnet stamping plate, followed by a drop of BRISA® Paint Soft White. Use the stamping scraper to blend the colors together on the plate. Remove excess blend, roll stamp over pattern and apply to the nail. DO NOT CURE.
• 5 Mix Additives and BRISA® Paint White in a mixing tray to create the design’s colors. Gently stir together using a spatula or an orangewood stick until thoroughly mixed. Use a slow, steady motion to avoid creating bubbles. To maintain the integrity of the enhancement never mix more than 30% Additives to any gel blend.
  Yellow Blend
  - 3 parts BRISA® Paint White
  - 1 part Additives Yellow
• 6 Use a detail brush to apply Yellow Blend around the top left and bottom right corner of the nail. Cure for one minute.
• 7 Apply a thin layer of BRISA® Gloss. Cure for one minute.
• 8 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.R.E.P. the natural nail and apply a CND® Tip. Apply a thin base layer of RETENTION+® Sculpting Powder Clear and finish with the 180 side of the Hot Shot™ File. (For details, see our "Liquid & Powder Enhancements Sculpted on a Tip" Step-by-Step.)
• 2 Apply a thin layer of RETENTION+® Sculpting Powder Pure White in a 3-D scallop shape to the right side of the nail.
• 3 Apply SHELLAC® Be Demure over the Liquid & Powder scallop shape. DO NOT CURE.
• 4 Use the tip of an orangewood stick to place Swarovski AB Crystals into the wet color. Cure for one minute in the CND® LED Lamp.
• 5 Mix a drop of XPRESS5 ™ Top Coat with Gold Glitter and use a detail brush to accent the scalloped edge. Cure for one minute.
• 6 Apply a thin layer of XPRESS5 ™ Top Coat. Cure for one minute.
• 7 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.R.E.P. the natural nail and apply a CND® Tip. Apply a thin base layer of RETENTION+® Sculpting Powder Pure White and finish with the 180 side of the Hot Shot™ File. (For details, see our "Liquid & Powder Enhancements Sculpted on a Tip" Step-by-Step.)
• 2 Apply a bead of RETENTION+® Sculpting Powder Pure White to the entire nail. Press the tip of the sculpting brush into the wet powder to etch in the vein pattern.
• 3 Mix a drop of liquid into CND® Additives Black in a mixing tray and use a detail brush to fill in the veins. Let dry.
• 4 Using a makeup sponge with VINYLUX® Aqua-intance, sponge the color around the veins. Let dry
• 5 Mix a drop of liquid into Additives Copper Mine in a mixing tray and use a detail brush to accent the veins. Let dry.
• 6 Apply a thin layer of BRISA® Sculpting Gel Clear to the entire nail. Cure for one minute in the CND® LED Lamp. Refine if necessary.
• 7 Apply a thin layer of BRISA® Gloss. Cure for one minute.
• 8 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our SHELLAC® Brand 14+ Day Nail Color Application & Removal Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply a thin layer of SHELLAC® Cream Puff. Cure for one minute.
• 4 Apply CND® Additives Exhibition to the entire nail using a dry CND® ProSeries Gel Flat Oval Brush.
• 5 Apply a thin layer of SHELLAC® Clearly Pink. Cure for one minute.
• 6 Apply Additives Lavender Whispers to 2/3 of the nail and Additives Twinkle Pink to the tip of the nail using a dry ProSeries Gel Flat Oval Brush.
• 7 Use a detail brush with SHELLAC® Silver Chrome to outline the perimeter of the nail. Cure for one minute.
• 8 Press Silver Transfer Foil over the cured Silver Chrome.
• 9 Apply a thin layer of XPRESS5 ™ Top Coat. Cure for one minute.
• 10 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our SHELLAC® Brand 14+ Day Nail Color Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply two thin layers of SHELLAC® Cream Puff. Cure each layer for one minute.
• 4 Apply three strips of striping tape in diagonal directions creating four geometric sections.
• 5 Apply SHELLAC® Magenta Mischief over the top quarter of the nail and repeat covering the other sections with SHELLAC® Art Basil, SHELLAC® Future Fuchsia, and SHELLAC® Digi-teal.
• 6 Using tweezers, remove the striping tape to reveal the Cream Puff lines of the design. Cure for one minute.
• 7 Apply a thin layer of XPRESS5™ Top Coat. Cure for one minute.
• 8 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our VINYLUX® Long Wear Polish System Step-by-Steps.)
• 2 Apply two thin layers of VINYLUX® Cream Puff. Allow to dry.
• 3 Apply three strips of striping tape in diagonal directions creating four geometric sections.
• 4 Apply VINYLUX® Magenta Mischief over the top quarter of the nail and repeat covering the other sections with VINYLUX® Art Basil, VINYLUX® Tutti Frutti, and VINYLUX® Digi-teal. Repeat this step for additional coverage. Allow color to dry for 1-2 minutes.
• 5 Using tweezers, remove the striping tape to reveal the Cream Puff lines of the design.
• 6 Apply a thin layer of VINYLUX® Long Wear Top Coat.

instructions

• 1 P.E.P. the natural nail. (For details see our SHELLAC® Brand 14+ Day Nail Color Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply a thin layer of SHELLAC® Digi-Teal. Cure for one minute.
• 4 Press the Aqua AB Transfer Foil over SHELLAC® Digi-teal creating a random pattern.
• 5 Apply CND® Additives Cerulean Blue around the foil using a dry CND® ProSeries Gel Flat Oval Brush. Repeat using Additives Cobalt Clash covering all the portions of Digi-teal.
• 6 Burnish Additives Black around the perimeter of the nail using a dry CND® ProSeries Gel Flat Oval Brush.
• 7 Apply a thin layer of XPRESS5™ Top Coat. Cure for one minute.
• 8 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our VINYLUX® Long Wear Polish System Step-by-Steps.)
• 2 Apply two thin layers of VINYLUX® Digi-teal to the entire nail. Let dry completely.
• 3 Apply a thin layer of Transfer Foil Adhesive to the nail. Allow to dry until the adhesive becomes transparent.
• 4 Press the Aqua AB Transfer Foil over the dry adhesive creating a random pattern.
• 5 Apply CND® Additives Cerulean Blue around the foil using a dry CND® ProSeries Gel Flat Oval Brush. Repeat using Additives Cobalt Clash covering all the portions of the Digi-teal.
• 6 Burnish Additives Black around the perimeter of the nail using a dry CND® ProSeries Gel Flat Oval Brush.
• 7 Apply a thin layer of VINYLUX® Long Wear Top Coat.

instructions

• 1 P.R.E.P. the natural nail and apply a CND® Clear Tip. Apply a BRISA™ Sculpting Gel Clear enhancement and finish with the 180 side of the Blizzard™ File. (For details, see our " BRISA™ Gel Enhancements Sculpted on a Tip" Step-by-Step.)
• 2 Apply a thin layer of BRISA™ Paint White to the entire nail. Cure for one minute in the CND® LED Lamp.
• 3 Apply CND® Additives Lavender Whispers and Additives Twinkle Pink over the nail in a random pattern using a dry CND® ProSeries Gel Flat Oval Brush.
• 4 Mix Additives and BRISA™ Paint White in a mixing tray to create the design's colors. Gently stir together using a spatula or an orangewood stick until thoroughly mixed. Use a slow, steady motion to avoid creating bubbles. To maintain the integrity of the enhancement never mix more than 30% Additives to any gel blend.
  
  Blue Blend
  - 3 parts BRISA™ Paint White
  - 1 part CND® Additives Cobalt Clash
  Green Blend
  - 3 parts BRISA™ Paint White
  - 1 part CND® Additives Green
  Pink Blend
  - 3 parts BRISA™ Paint White
  - 1 part CND® Additives Twinkle Pink
• 5 Apply a rectangle over the top right side of nail with a CND® ProSeries Gel Flat Oval Brush and the Blue Blend. Repeat using the Green Blend over the left side of the nail and the Pink Blend over the lower right side. Cure for one minute.
• 6 Apply a thin layer of BRISA™ Gloss. Cure for one minute.
• 7 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.R.E.P. the natural nail and apply a CND® Tip. Apply a thin base layer of RETENTION+™ Sculpting Powder Clear and finish with the 180 side of the Hot Shot™ File. (For details, see our "Liquid & Powder Enhancements Sculpted on a Tip" Step-by-Step.)
• 2 Dip a clear bead of RETENTION+™ Liquid and Powder into CND® Additives Cerulean Blue and blend together on a piece of palette paper. Apply the bead diagonally across the top third of the nail, pressing towards Zone 2 to feather out the color slightly.
• 3 Repeat with Additives Lavender Whispers across the center and Additives Haute Pink at the tip of the nail.
• 4 Apply Perfect Color Powder Pure White to the sidewalls of the nail to encase edges of design. Refine with a file if needed.
• 5 Apply a thin layer of BRISA™ Gloss. Cure for one minute.
• 6 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our SHELLAC® Brand 14+ Day Nail Color Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply two thin layers of SHELLAC® Cream Puff. Cure each layer for one minute.
• 4 Apply a thin layer of SHELLAC® Black Pool diagonally across ¾ of the nail. Cure for one minute.
• 5 Apply CND® Additives Confetti Kiss over the Black Pool in a linear pattern.
• 6 Using a stylus, create the drips of color at the cuticle area with SHELLAC® Future Fuchsia, SHELLAC® Art Basil, SHELLAC® Magenta Mischief and SHELLAC® Digi-teal. Cure for one minute.
• 7 Apply a thin layer of XPRESS5™ Top Coat. Cure for one minute.
• 8 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our VINYLUX® Long Wear Polish System Step-by-Steps.)
• 2 Apply two thin layers of VINYLUX® Cream Puff.
• 3 Apply VINYLUX® Black Pool diagonally across 3/4 of the nail.
• 4 Apply CND® Additives Confetti Kiss into the wet Black Pool in a linear pattern.
• 5 Using a stylus, create the drips of color at the cuticle area with VINYLUX® Tutti Frutti, VINYLUX® Art Basil, VINYLUX® Magenta Mischief and VINYLUX® Digi-teal.
• 6 Apply a thin layer of VINYLUX® Long Wear Top Coat.

instructions

• 1 P.E.P. the natural nail. (For details see our SHELLAC® Brand 14+ Day Nail Color Step-by-Steps.)
• 2 Apply a thin layer of SHELLAC® Base Coat. Cure for 10 seconds in the CND® LED Lamp.
• 3 Apply a thin layer of SHELLAC® Mauve Maverick. Cure for one minute.
• 4 Apply a thin layer of SHELLAC® Future Fuchsia diagonally across the top third of the nail, SHELLAC® Digi-teal across the center and SHELLAC® Magenta Mischief over the bottom third. DO NOT CURE.
• 5 Use a stylus to etch 3-4 short, thin lines across the top and bottom of the nail. Cure for one minute.
• 6 Apply CND® Additives Cobalt Clash around the cuticle area with a dry CND® ProSeries Gel Flat Oval Brush.
• 7 Using a makeup sponge with SHELLAC® Untitled Bronze, sponge the color around the perimeter of the nail. Cure for one minute.
• 8 Apply a thin layer of XPRESS5™ Top Coat. Cure for one minute.
• 9 Wipe with 99% Isopropyl Alcohol to remove top film.

instructions

• 1 P.E.P. the natural nail. (For details see our VINYLUX® Long Wear Polish System Step-by-Steps.)
• 2 Apply a thin layer of VINYLUX® Tutti Frutti diagonally across the top third of the nail, VINYLUX® Digi-teal across the center and VINYLUX® Magenta Mischief over the bottom third. Repeat this step for additional coverage.
• 3 Apply 3-4 short, thin lines over the top and bottom of the nail with a striping brush and VINYLUX® Mauve Maverick.
• 4 Using a makeup sponge with VINYLUX® Untitled Bronze, sponge the color around the perimeter of the nail.
• 5 Mix a small amount of Super Shiney™ Top Coat with CND® Additives Cobalt Clash in a mixing tray and feather around the cuticle area with a CND® ProSeries Gel Flat Oval Brush.
• 6 Apply a thin layer of VINYLUX® Long Wear Top Coat.